- Light print 500x1200mm
- Paper width 1400mm
- Max reel diameter 1000mm
- No. 4 shots of the foil (2 longitudinal and 2 transversal)
- Speed production lines 2000-3000 / time varies depending on the pace and graphics
- Register control via optical
- Feed paper through a brushless motor
- Unwinder and rewinder independent towing paper

The automatic press PCR is suitable to hot imprint large-size flat surfaces for a maximum profit of press equal to 500x700mm or 700x1000mm. The press can stamp both in automatic and semiautomatic way. It's suitable to imprint on the spread sheet because it has a length from the center of the base of press to the back carpentry of 600mm and a light of the sheet side passage to stamp in the center a format of 800x1200mm. The automatic press PCR is an evolution of our model Semiautomatic PC, created for answering to the demands of a part of our costumers. In fact the request is to have a machinery that develops a continuous production without the fixed presence of an operator on the side of the machine. The demand of the costumers is that to be able to hot stamp or to punch sheets of paper and cardboard with the maximum of the possible speed, in industrialized way and with production costs and results perfectly calculable. The starting times of the automatic press PCR are very short thanks to the simplicity of the starting up of the machine.

The vertical roll press model PR is suitable for the hot stamp in continuous way through film of objects in plastic, wood and wood-grain patterns materials. The pieces are simply lay down on a conveyer belt that provides, in perfect safety and with adjustable speed, to transport the particular under a heated gummed cylinder that provides to imprint in continuous way and without formation of beads or wrinkles on the decorative film. The cycle of press, in accordance with the choice of the operator, can be manual or automatic.

The vertical roller press model PR is suitable for the hot stamp in continuous way through film of particular surfaces like sheets, panels, PVC and leatherette. The pieces are simply lay down on a conveyer belt that provides, in perfect safety and with adjustable speed, to transport the particular under a heated gummed cylinder that provides to imprint in continuous way and without formation of beads or wrinkles on the decorative film. The cycle of press, in accordance with the choice of the operator, can be manual or automatic.

The machine TS 600 is suitable for the serigraphy of plain supports that can reach a height equal to 110mm. The machine TS 600 has the possibility to be assembled with a coil cradle, also multiple, for the automatic stamp of spool or fabric pizza. Always on demand of the costumer it is possible to combine in line oven UV to kiln-dry the ink faster.